Henan Yowo Industrial Co., Ltd
To be your most trusthworthy supplier of Aluminum products in China! --- Henan Yowo Industrial Co., Ltd
Add to Cart
Product Introduction
It has high plasticity, corrosion resistance, good electrical and thermal conductivity.
1050 is a product in the pure aluminum plate series, and the chemical composition and mechanical properties of the 1060 series products are similar. It is basically replaced by 1060 in current applications.
The last two Arabic numerals of the 1050 series are 50. According to the international brand naming principle, the aluminum content must reach 99.5% or more to be a qualified product. China’s aluminum alloy technical standard (GB/T3880-2006) also clearly stipulates that the aluminum content of 1050 reaches 99.5%.
Because it does not contain other technical elements, the production process is relatively simple and the price is relatively cheap. It is currently the most commonly used series in conventional industries.
Industrial pure aluminum has the characteristics of high plasticity, corrosion resistance, good electrical and thermal conductivity, but low strength. It is not strengthened by heat treatment and has poor machinability. It can accept contact welding and gas welding.
Typical use / Applications:
1050 is widely used in daily necessities, lighting appliances, reflectors, decorations, chemical industry containers, heat sinks, signs, electronics, lamps, nameplates, electrical appliances, stamping parts and other products.
It is used in some occasions that require high corrosion resistance and formability, but does not require high strength. Chemical equipment is its typical use.
Chemical composition
| Alloy, temper | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr | other | AL | ||
| New alloy | Old alloy | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | —— | 0.07 | 0.03 | —— | Single | Total | |
| 1050 | —— | 0.03 | —— | 99.50 | |||||||||
Mechanical property
| Alloy and Temper | Tensile strength Rm/Mpa | Yield strength Rp0.2/Mpa | Elongation /% | Hardness / HBWα |
| 1050-H24 | 105-145 | 75 | 3 | 33 |
Physical property
| Alloy and temper | Thermal expansivity (20-100℃) μm/m·k | Melting range (℃) | Conductivity 20℃(68℉) (%IACS) | Electrical resistivity 20℃(68℉) Ωmm2/m | Density (20℃)(g/cm3) |
| 1050-H24 | 23.6 | 646-657 | 61.3 | 0.0281 | 2.71 |
Quality characteristics
Density: 2.710g/cm³.
Category: pure aluminum (AL above 99.5%)
Aluminum plate varieties: bright aluminum plate, brushed aluminum plate, pattern aluminum plate, film aluminum plate...
Supply status: H24, H14, H12, H26, H18, O...
Thickness: 0.2mm-50mm
Width: 1000/1220/1250/1500/2000mm or as you required.
Length: 2000/2440/2500/3000/6000mm or as you required.
