Henan Yowo Industrial Co., Ltd
To be your most trusthworthy supplier of Aluminum products in China! --- Henan Yowo Industrial Co., Ltd
Add to Cart
1100 H18 High Strength Aluminum Alloy Sheet Plate With GB Standard
Product Introduction
It has the characteristics of high plasticity, corrosion resistance, good electrical conductivity and thermal conductivity.
1100 belongs to a product in the pure aluminum plate series, and the chemical composition and mechanical properties of the 1060 series are similar. It is basically replaced by 1060 in current applications.
1100 aluminum alloy is ordinary industrial pure aluminum with 99.0% aluminum content. It cannot be strengthened by heat treatment; the strength is low, but it has good ductility, formability, weldability and corrosion resistance. After anodic oxidation, it can further improve its corrosion resistance while obtaining a beautiful surface.
Various aluminum materials can be produced through pressure processing, but the strength is low. Other process performance is basically the same as 1050A.
Typical use
1100 is usually used for parts that require good forming and processing performance, high corrosion resistance, and do not need high strength, such as food and chemical handling and storage equipment, sheet metal products, hollow hardware processed by drawing cargo spinning, and welding combination keys , Reflectors, nameplates, etc.
Chemical composition
| Alloy temper | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr | Other | AL | ||
| New alloy | Old alloy | 0.95 Si+Fe | 0.05~0.20 | 0.05 | 0.05 | —— | 0.10 | —— | —— | Single | Total | ||
| 1100 | —— | 0.05 | 0.15 | 99.00 | |||||||||
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | OTHERS | OTHERS | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | — | 0.05 | 0.03 | 0.03 | — | 99.5 |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | — | 0.04 | 0.03 | 0.03 | — | 99.7 |
| 1100 | 0.95 Si + Fe | 0.05-0.20 | 0.05 | — | — | 0.1 | — | 0.05 | 0.15 | 99 | |
| 2024 | 0.5 | 0.5 | 3.8-4.9 | 0.30-0.9 | 1.2-1.8 | 0.1 | 0.25 | 0.15 | 0.05 | 0.15 | Rem. |
| 3003 | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.5 | — | — | 0.1 | — | 0.05 | 0.15 | Rem. |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | — | 0.25 | — | 0.05 | 0.15 | Rem. |
| 3005 | 0.6 | 0.7 | 0.3 | 1.0-1.5 | 0.20-0.6 | 0.1 | 0.25 | 0.1 | 0.05 | 0.15 | Rem. |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.50-1.1 | 0.1 | 0.25 | — | 0.05 | 0.15 | Rem. |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.1 | — | 0.05 | 0.15 | Rem. |
| 5252 | 0.08 | 0.1 | 0.1 | 0.1 | 2.2-2.8 | — | 0.05 | — | 0.03 | 0.1 | Rem. |
| 6061 | 0.40-0.8 | 0.7 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | 0.05 | 0.15 | Rem. |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.2 | 0.05 | 0.15 | Rem. |
Aluminum plate varieties: bright aluminum plate, brushed aluminum plate, pattern aluminum plate, film aluminum plate...
1. Supply status: H24, H14, H12, H26, H18, O...
2. Thickness: 0.2mm-50mm
3. Width: 1000/1220/1250/1500/2000mm
4. Length: 2000/2440/2500/3000/6000mm
5. Customized service is available.
Mechanical properties
Tensile strength σb (MPa): 110 ～136.
Elongation δ10 (%): 3 ～5.
Approximate alloy grade
1100 (L6-1)——
International standard: Al99.0 (ISO);
Japan: Al100/Al00 (JIS);
European standard: EN AW 1100 (EN);
France: A45;
Canada 990C (CSA);
United States: 1100 (AA)
